interactive sculpture

New Above and Below Photos from My Finding Light Exhibition

You'd be forgiven for forgetting I made two new interactive living sculptures over the summer, since I've only been posting photos of All That I See so far!  I did, however, make a second one titled Above and Below.  Here are some photos from that part of the exhibition:

More Finding Light Exhibition Photos!

Here are a few more photos from my Finding Light exhibition currently up in USM's Goppert Gallery!  I'm taking photos in batches (it is very hard to get good photos in low-light settings, so I take some, see if I have any good ones, post, and repeat!).  It's not hard to take photos of the non-interactive parts of the show, so I haven't been focusing on those just yet since it's more important to figure out the photography for the interactive pieces since they're so tough to capture!  So first up - here are some additional photos of All That I See.  The algae that is growing on the sculpture is a local species - I took water from USM's pond and have been cycling it and keeping it alive and flourishing for several months now within the sculpture's glass container.

Intercambiador ACART Residency Journal 13 - Exhibition Shots

Here are a handful of exhibition shots of the interactive sculptures and artist statement/exhibition text from my Quinta del Sordo exhibition in Madrid.

Intercambiador ACART Residency Journal 10 - New Artwork!

Here's my second interactive sculpture!  It's had less time for the algae to grow on it, but so far I'm liking it.  With the snails piece, having them entirely underwater wasn't necessarily a "death sentence" for the snails as a number of species of snails are aquatic.  There are no aquatic pigeons, though, so I made this one to have its head jussssst above the top of the container.

I didn't take many in-process photos of this one primarily because a lot of pieces to this one were really delicate while uncured (the feet, the beak, the tail and wing tips) so I was mostly gently cradling it while sculpting and then went straight into curing it.  But to the right is a photo of it post-curing but pre-powdering.

Quinta del Sordo Exhibition!

My exhibition, titled "In the Dark" (in Spanish), associated with my Intercambiador ACART residency is opening tomorrow evening!  I haven't been able to take a photo of the second sculpture I made yet for various reasons, but the show will have two interactive sculptures of mine as well as five paintings (two of which I just finished and also have yet to post online!).   The exhibition will be held in Quinta del Sordo here in Madrid, Spain, and will be up from July 20-28th.  Here's the exhibition card:

Intercambiador ACART Residency Journal 3 - New Artwork!

When I skyped with Juan about coming here, he mentioned that some of my work that interests him the most are my interactive plant pedestals.  I really enjoyed making those, but I made those in graduate school - a period in which I spent almost all my time making artwork and had access to a large woodshop and other facilities as well.  Now that I teach and often only really produce work during the summers and while on residency, it's much simpler to create more transportable (and easily exhibitable, which is a bonus) two-dimensional work.  I've started to push back at that limitation already - my pieces that I made in France are so delicate that showing anywhere other than locally is pretty difficult, and the sculptures I made earlier this summer in Portugal are even more fragile due to the found branches and lichens I used.  I decided I'd take Juan up on the challenge to create some new interactive plant pieces, and began brainstorming even before leaving for Europe.  

The clay I helped Dr. John Pojman create, 3P QuickCure Clay, is waterproof, and that's an angle I've been wanting to explore for a while.  I decided I'd like to create a sculpture that I'd then house in a glass container underwater, and as algae grew in the container, as algae tends to do when provided with water and sunlight, the sculpture would become partially or totally obscured - except I would coat the sculpture in a glow-in-the-dark powder and provide viewers with a black light to set the sculpture aglow.  Even back in Portugal, I'd briefly toyed with the idea of sculpting Balancing Act (my painting of a tower of snails), but then I thought I'd save it for this project instead.

So when I started work in the studio, I began sculpting snails.  

A sculpture is different from a painting, though, and in order to have the 3D version of the tower actually stand on its own, I couldn't have the bottom snail be upside down.  I didn't want them all to be upright, either, though... so I decided to have one snail be on its side and have that snail be on the bottom of the tower in a nod to the potential instability of all the rest.

After assembling all my individual snails into a tower, I hastily patted some glow powder onto it and cured it (the tower was moderately unstable while uncured).  I thought the amount of glow powder that actually adhered to the clay wouldn't be sufficient for my purposes, so after thinking about it for a day, I sprayed it several times with an aerosol satin varnish and each time before the varnish dried I added the glow powder to it until I felt I had a fairly solid coating.

As all this was going on, the fountain water I had collected from the Real Jardín Botánico had been sitting in the window, slowing growing more algae.  Once the sculpture's coating seemed dry, I put it into a glass vessel I had purchased from a Chinese bazaar and poured the fountain water (and some additional tap water) in.

The piece will hopefully be ever evolving as the algae grows, but it's already far enough along for me to share some photos!