experimentation

My April 2022 Raku Ceramics

in , ,

I just completed another raku workshop this past weekend, and as I was looking through my files I realized I’ve not yet published the raku pieces I made at my last one in April 2022. Clearly I should do that before sharing my latest workshop photos and products!

On my April 2022 raku workshop, I wanted to try to carbonize various plant fronds or leaves onto the surface of my pieces. This was a complete experiment, and it was mostly a failure. I tried a variety of ferns and tropicals out, and one after another, they burned away without leaving a trace. Here are some plates that I attempted to salvage after that didn’t work out. With the first, I pivoted to a sugar and horsehair application. With the second, I tried to use ferric chloride to stain the surface with plant leaves that weren’t carbonizing, but they just left those not-terribly-appealing ferric chloride splotches.

Once I realized those techniques were not working, I tried etching fern fronds onto a plate in a “baked potato” aluminum foil saggar firing; it kind of worked, but I think it’s underwhelming. Since none of those plant techniques were doing super well, I just put a litho carb copper glaze onto my final plate.

I also made a rounded crackle vessel and the glaze turned out really well, but the ceramic physically cracked due to thermal shock so it’s got that permanent asterisk associated with it.

I glazed this spherical vessel with copper glazes (Copper Sand is on the exterior and I think that’s Midnight Luster on the interior), and it came out looking like a little planet! This one’s a definite favorite.

And finally, the one plant piece that turned out beautifully and justified all the failures: this is another “baked potato” saggar firing, and the Muehlenbeckia axillaris vines I used carbonized perfectly into this vase’s surface.

I also lost a large platter-like vessel (it broke into quite a few pieces and was not salvageable) and had another plate fuse with a kiln brick and lose part of its bottom. I eventually recycled that broken platter-like piece in my rock tumbler!

LSU Vet Med Artist Residency Artwork 1 Process

in ,

I tend to be pretty bad about taking process photos, but I’ve been trying to be more intentional about it for this residency! Here are several images of Fortification in progress, culminating in the finished artwork.

Pandemic Productivity

in

Well, the world’s been upended. As a professor, this is the first time I’ve attempted to teach online coursework, and obviously the circumstances - these courses were not designed with online in mind, ISP overloads are causing even my own mid-tier home internet to no longer be able to stream high-quality video between the hours of 7am-2am, students have other demands on their time like familial support and sharing devices and spaces - are sub-optimal for sure. The courses I’ve been teaching this semester include Figure Drawing (no live model anymore and no ability to give rapid critiques on what is the hardest technical subject matter, but at least they can do self-portraits and use public domain imagery), Painting I (honestly, not so bad especially since we had a little over eight weeks in person to lay the groundwork), and Senior Art Seminar (I am mourning the loss of accessible senior thesis shows and receptions but am intrigued about how a virtual exhibition could be executed), as well as overseeing internships. We’re all just trying to cope as best we can with these new circumstances, but from the conversations I’ve been having with students I think we’re all chomping at the bit to be able to return once it’s safe to do so. When that will be, though, is still the big unknown.

I know that I am very lucky in that overall I still have my job and am not currently in financial crisis like millions of others due to this pandemic. The quarantining has nevertheless overhauled my personal life, too, beyond the obvious lack of professional and social gatherings. I really enjoy exercising, but more than that, I also need it - when I’m too sedentary, my back weakens to the point that it then goes out. What seems to work best for back maintenance is regular, long, and fairly high-intensity cardio. However, my knees are not able to cope with high-impact exercise. This means that ellipticals are my favorite workout, followed by swimming and riding stationary bikes. (I’m a gym devotee not only due to the access to low-impact forms of exercise but because I really appreciate climate control when I’m exercising - I sweat a lot even in air conditioned spaces. I also like the ability to watch cable television on their machines since I don’t have cable at home!). Because I can’t do any of my gym workouts, I have been alternating long walks around the neighborhood and riding my bicycle in laps around a nearby elementary school parking lot.

I try to stay out for at least 30 minutes each time, but especially on the walks I aim for an hour since I’m not getting high-intensity exercise from them. I haven’t ridden a real bike (as opposed to a stationary bike) in such a long time that I’m basically relearning how to do so and am not great at controlling it yet, but I’m already improving a little! The neighborhood walks have been both interesting and a bit scary - I was attacked by a loose and very territorially aggressive dog a couple days ago but luckily I wasn’t bitten. I have discovered that Sioux City is not the most walkable place due to a lack of sidewalks and crosswalks on some major streets (Gordon Drive, I’m looking at you). A lot of people also block their driveway sidewalks with vehicles. Furthermore, the weather has not been particularly conducive to outdoor exercise. We had a blizzard that knocked the power out for several hours a week ago, and today I was awoken by the sound of hail and whistling wind. It’s also been quite rainy, which is fairly normal for March but does put a damper (see what I did there?) on being outdoors. But needs must! Here are a few coronavirus door signs I documented on my neighborhood walks.

Since I’m still working (and doing so in a different way that was unplanned-for), I have less free time than one might anticipate. Between work, needing to exercise more frequently since the intensity is lowered, and cooking all of my meals, I’m staying fairly busy. I also have a list of chores I’ve been slowly tackling (filing my taxes are next on the list). But everyone needs some form of fun, and I’ve been feeling just a little too stressed to want to begin a new professional piece - though I hope to begin that soon! So instead, I’ve been making a few ceramics. For professional development, I was sitting in on a section of Ceramics I this semester because it was the one discipline I knew barely anything about, and that seemed like a deficit that especially since I also serve as Art Department Head I wanted to address. I learned some about wheel-throwing (there’s much more there than I’ve mastered as of now, but maybe some day!), and a little about glazing. About six or seven weeks in, I gathered that you can add chunks of rust (aka iron oxide) into the clay and they will add value and texture. What values and textures are TBD each time, though, based on firing and other variables - the iron oxide will likely melt in high-fire temperatures and that can cause cavities and vertical runs! That really captivated me - I think because A) I love color, B) I love nature-based chaos as a compositional wild card, and C) I love the conceptual power of rust. It also opened up the world of additives in general, and I decided to attempt experimenting with adding mica pieces, dried clay bits, and potentially other media like vermiculite too.

Obviously the pandemic has disrupted my ceramics progress, but it hasn’t halted it. I’ve been slowly but steadily making pinch pots at home as a low-pressure creative outlet and form of fun. Here are a few images of some of my current experiments. I won’t see how any of these pieces actually turn out until they’ve been through bisque-firing and then glazing, so probably at this point we’re looking at the fall, but it’s something nice to work on nevertheless!