QCC

New Challenge-Based Artwork: Construct

in , ,

Once again interrupting my Japanese posts to remind you that the invitational You Want a Piece of Me? exhibition which I previously posted about here ends on August 17, 2025, so due to the gallery’s open hours you have two more dates left in which to stop by! I’ll get more into that below, but first, let’s do a deep dive into what I did.

This show asked artists to create art using a jigsaw puzzle, or puzzle pieces, as part of the art - and to leave at least some portion of original puzzle visible. You may recall that last year we did a similar challenge using board games, and here is what I did for that Advance to Gogh show in 2024!

For You Want a Piece of Me?, I needed to recycle puzzles - but I don’t own any, so I stopped by a thrift store and perused their offerings. I ended up buying three puzzles, mostly based on the differing scale of the pieces. I hadn’t decided what to do yet, but I figured owning these puzzles was a good first step. They were, in order of scale: L.O.L.Surprise! Floor Puzzle [large pieces], Milton Bradley lambs puzzle [medium pieces, 1 original piece held in an octopus tentacle], Milton Bradley Big Ben waterfall puzzle [small pieces, 1 original piece held in an octopus tentacle].

I pondered what I wanted to do with them for some time, as I wanted to make something that was still my own but that also satisfied the challenge parameters. I eventually decided I’d make a sort of topography out of the puzzles. This required actually building them, which for the 1000 piece puzzle took far longer than I wanted it to; I ended up building the other two easily but only assembling a few sections of the Milton Bradley Big Ben waterfall puzzle until I had enough connected material to satisfy my needs.

Then I built up a patchwork foundation, purposefully rejecting any edge pieces as I wanted the sculpture to communicate growth potential along its full border. After I glued it together and somewhat leveled its base, I then sculpted an octopus atop it. I formed the octopus out of QCC, clutching a mid-sized puzzle piece in one of its tentacles and a small piece in another. I also added some sand ridges. After curing, I painted the whole sculpture! Here are some progress pictures:

And here’s the finished piece! This is Construct, acrylic, QuickCure Clay, glue, and puzzle pieces, 16x25.67x3.25", 2025.

If you want to see Construct and the other Gallery 103 You Want a Piece of Me? entries in person, you can stop by either tomorrow (Saturday, August 9th) or next Saturday, August 16th between 10am and 1pm. Gallery 103 is located on the ground floor of the Ho-Chunk Centre located at 600 4th St, Sioux City, IA 51101.

My Artwork Illustrates a Chemical Review on Frontal Polymerization!

in

“Frontal Polymerizations: From Chemical Perspectives to Macroscopic Properties and Applications” by Benjamin A. Suslick, Julie Hemmer, Brecklyn R. Groce, Katherine J. Stawiasz, Philippe H. Geubelle, Giulio Malucelli, Alberto Mariani, Jeffrey S. Moore, John A. Pojman, and Nancy R. Sottos, published by American Chemical Society (ACS) Publications on February 24, 2023, is a 62-page chemical review. My QuickCure Clay sculpture Catalyst illustrates Section 5.4.4. Frontally Polymerized Artwork in Figure 40 along with other QCC artists’ works.

The above article title links to the online review, and here’s the PDF version. Below is the relevant page!

Frontal Polymerizations: From Chemical Perspectives to Macroscopic Properties and Applications Section 5.4.4 with artwork illustration by Shelby Prindaville.

Whiterock Art Show Photos!

in ,

Here are some photos from my three-person show Whiterock Art at the Betty Strong Encounter Center in Sioux City, IA! You can still check out this exhibition in person through November 13, 2022. I have 37 works on display, including 20 chromatograms, 15 site-specific ceramics, and 2 painted bas reliefs on panel using the polymer clay I helped create (QuickCure Clay).

As you can see, I arranged dried botanicals harvested from Whiterock Conservancy in four of my 41.816, -94.646 ceramic vessels to show this ceramic collection’s utility and connection to the landscape. My friend, former colleague, and master ceramist Susan Nelson inspired me to do this, as she often shows and photographs her ceramic work with ikebana, or the art of Japanese flower arrangements. I also placed a representative sampling of the small rocks, twigs, and other debris I cleaned out of the clay in a fifth display inside one of the smallest dishes.

At the reception for the show, I sold four of the 41.816, -94.646 ceramic pieces! I was pretty pleased with that, particularly because my price point for pieces in this collection was significantly higher than that of my stoneware work, given all the additional labor that went into this site-specific series. One of the buyers selected a piece holding dried botanicals, and another picked the vessel containing the rocks, twigs, and debris cleaned out of the clay body; both shared with me that they plan to keep those displays intact. That intent surprised me, but I’m happy that my decorative touches felt so appropriate that they’ll continue on beyond the exhibition!

LSU Vet Med Artist Residency Artwork 20 Process

in ,

Here are a couple of photos of the in-progress Vulture Sculpture! In the first image, you can see how I built an internal armature out of pink styrofoam insulation, wire, and disposable chopsticks. Armatures are really helpful for a few reasons: A) they provide structure and support to bolster strength and keep the clay from sagging, B) they weigh a lot less than clay which makes the piece-in-progress lighter so it puts less stress on weight-bearing areas while wet/uncured C) if you leave the armature inside - like you can do with QuickCure Clay - the finished piece is lighter than if it were solid clay which is typically desirable, and finally D) the armature materials usually cost less than using an equivalent amount of clay.

Then in the second image, it’s midway along; I’m still sculpting the QCC (note the head and wings are unfinished) but it’s taking real shape and I’ve already incorporated the artificial turf, though I have yet to “mold” it with the heat gun. Finally, there’s the finished piece in a similar orientation for comparison!

LSU Vet Med Artist Residency Artwork 20

in ,

This is the final piece of artwork I completed on-site at LSU Vet Med during my two-month summer 2022 residency! I think finishing 20 exhibitable pieces including mixed media paintings, a relief, ceramics, and a sculpture in 7 weeks is a remarkable feat, so I am very happy with my productivity.

I worked right up until the day of the exhibition opening on this piece, but I managed to get it “finished” in time - I put that in quotes as I still needed to briefly borrow it back from the exhibition midway through to put a protective varnish on top!

I had wanted to do a sculpture this whole time because A) I’ve always liked putting on exhibitions that have multiple disciplines and media on display to more deeply engage a broad viewership, B) I wanted to really highlight QuickCure Clay, as I’d helped create it with Dr. John Pojman at LSU a decade ago and it felt right to use it in at least a couple of pieces this summer, and C) I had been given a couple pieces of artificial turf from the wildlife hospital that I wanted to incorporate into artwork in some way, and relatively early on I had a lightbulb moment wherein I thought the astroturf had vulture neck-feather vibes! It worked very well, in that a lot of people couldn’t figure out where the artificial turf was used and at least one viewer told me she thought I thought the gravel I used as an installation aid was astroturf. Another viewer asked me if this was a taxidermied piece, which made me feel really good about the likeness!

I titled this piece Vulture Sculpture mostly because I didn’t have time to think about titling it when I had to make the show labels (I didn’t even think it was likely to get finished for it!), but I also do like the rhyme and the clear identification of the species of the bird. I sold this sculpture that same evening to the fabulous Dr. Mark Mitchell from Wildlife and ZooMed and his partner Dr. Lorrie Hale Mitchell from Integrative Medicine! They very kindly were willing to let me take it on exhibit first (as I’m doing with the rest of the sold paintings), but I made some delicate choices with this piece - the claws, the beak tip - that meant I thought it best to let them just take it after my LSU Vet Med solo show came down instead of potentially injuring the piece in shipping.

This is Vulture Sculpture, a mixed media sculpture of a black vulture including QuickCure Clay and ZooMed’s artificial turf, 13.5" x 7.5" x 20.5", 2022.

LSU Vet Med Artist Residency Artwork 7 Process

in ,

Here are some in-progress photos of Seeing Double!

LSU Vet Med Artist Residency Artwork 7

in ,
Artist Shelby Prindaville holding Tigger the Kunekune pig.

My seventh artwork almost didn’t get made on site - I knew what I wanted to do, but tried in vain to get my hands on a necessary component until Dr. Clare Scully came to the rescue!

Let me back up and explain it from the beginning. A very cute Kunekune pig named Tigger came in for observation and diagnosis and he left the next day feeling much better (and after I gave him a quick cuddle). With his owners’ permission, I decided I’d like to feature him in a painting or two! As I always do when I see a new species here at LSU Vet Med, I started asking about what veterinary materials they use specifically with that species - in this case, pigs. After hearing about a handful of items, the ones that seemed the most useful for my purposes were the pig sorting panels or “pig boards” and Dremel rotary tools (used to sand down hooves). I had brought a rotary tool with me as a sculpting aid already, so that was easy - but the pig sorting panel was a harder acquisition. This is because all the ones they had on hand were made out of plastic, and were pretty clearly intended to be easy to clean in a way that would make it harder to work archivally on top of and they were also obnoxiously colored. Wooden ones are regularly used, too, but there weren’t any in the large animal hospital as typically the wooden ones are just created on demand in a farm woodshop to save money and time.

two small wooden pig sorting panels or pig boards

I started asking all the large animal veterinarians, residents, and students if they knew of a source, put word out via my communications liaison Sandy Sarr, and posted a Craigslist ad… but a week had passed and my show exhibition was drawing closer so I thought I’d need to wait until I could ask my agricultural colleagues back in Iowa. And then Clare came into the room, we chatted, she said she’d see what she could do, and a couple of days later, she had done it! She had found two wooden pig boards for me that were the dimensions I had been looking for from another LSU site and said they were sufficiently used as to be destined for the scrap heap, so this was a much better use for them.

I happily adopted them both and gave them a light sanding and heavy cleaning. For the first composition I had in mind, the slightly smaller and more “standard” board worked better, so that’s what I went with! I would like to photograph it again when I get back home and have access to a large white background, but this image will do for now.

This is Seeing Double, a mixed media relief including Dremel counter relief, QuickCure Clay, PVP Prep Solution (betadine), and acrylic on a used pig board / sorting panel, 29.75x19.25x1.25”, 2022.

Seeing Double painting by Shelby Prindaville

Whiterock Conservancy New Artwork: Surface

in ,

I just finished my second relief from my Whiterock Conservancy residency earlier this summer! This piece depicts an American bullfrog, Rana catesbeiana syn. Lithobates catesbeianus, floating on the surface of one of Whiterock’s turtle ponds.

Here are a couple of process pictures of the underlying QuickCure Clay relief. I began by sculpting the above-water portions of the bullfrog, and then added patches of algae as well.

After I finished the relief elements, I began to paint! I’m pretty pleased with the end result. I finished this piece with two coats of gloss varnish to contribute to a wet appearance.

This is Surface, 12x16x2”, QuickCure Clay relief and acrylic on basswood panel, 2021.

Whiterock Conservancy New Artwork: Attuned

in ,

This is the first figurative piece I worked on at Whiterock Conservancy - a relief portrait of a small species of frog I found in abundance at the river shoreline. The Blanchard’s cricket frog, Acris blanchardi, is an endangered or threatened species in three states so far and is listed as a "Species of Greatest Conservation Need." It is considered a type of chorus frog, and is one of the smallest species of frogs in Iowa. Surprisingly (to me, at any rate) it is also considered a type of tree frog despite being semiaquatic and therefore not having the toe pads of their arboreal brethren.

As always, I began with a contour line drawing. My goal with this piece was a stylized, squashed relief reminiscent of antique bronze relief doors, so after finishing the drawing I began laying in the QuickCure Clay relief. Here are two process photos showing the beginning of that QCC work.

At this point, I got too involved in the actual creation to pause, so we’ll skip ahead to the finished work! This is Attuned, 14x11x1.35", QuickCure Clay relief and acrylic on basswood panel, 2021.

Attuned by Shelby Prindaville, Whiterock Conservancy 2021 artist in residence.

New Artwork: Catalyst

in

Here’s some new artwork to kick off a new year! This piece was inspired by my encounter with two octopi on my last scuba dive this summer with Silviu in Arinaga while on residency at La Pedrada de Noemí. It’s pretty unusual to see the common octopus, Octopus vulgaris, out and about during the day as they are typically nocturnal predators, but it was a very windy day with a lot of churning water and that must have drawn them out.

I have titled this piece Catalyst. It is mixed media including QuickCure Clay, aquabord panel, acrylic, and QuickCure Glaze Coating. Catalyst is capable of being displayed on a pedestal or installed on a wall. It is 13.5x14.5x6.25".

If you’re curious about the sculptural process with QCC, here are a few photos I took along the way. The first two are still in the uncured, sculpting stage and the second two are post-curing but pre-painting. I was actually quite drawn to the piece in its unpainted state, but I had to paint the panel at the very least due to its own mixed media, multicolored composition so I decided to go ahead with painting the whole piece. I might do a different version at some point that’s completely monotone, though, since I liked that quite a lot too.

QCC Is Licensed!

in ,

Some very exciting news - Quick Cure Clay (QCC), the clay I helped Dr. John Pojman develop, is now being licensed by Ranger Industries!  Ranger has products in nationwide stores like Michael's, so it might not be long before you can find it for sale in your neighborhood.  Here's a Greater Baton Rouge Business Report article about the deal (and about other startups that LSU is incubating).

You can see the product listing on Ranger's site as well!

I am so happy about this!  The clay is such a pleasure to work with that it really deserves market success.  And speaking of the clay and how nice it is to use, I've been working on another relief piece recently... more on that soon!