sloth

New Artwork!

I just completed a new piece of artwork - the second companion piece to Pilgrim.  I had intended to do at least two from the start, but it took a while to find the studio time to devote to the second piece.

In this one, I wanted to achieve a real sense of depth in my relief without being cartoonish.  My aim was to maintain the possibility of illusionism from some angles - particularly that of the shallower sections.  With Pilgrim, there is a relatively shallow relief over the entirety of the sloth's body.  In this new piece, the sloth's body contains an area that is solely painted with no relief at all and then extremely shallow through rather bold relief.

I'm considering titling this one Outreach.  It's Quick Cure Clay and acrylic on basswood panel, 12x6x1.75", 2018.  Due to the dimensions of the piece, it shows up quite large below; if you click on it though it will open up in an overlay that depending on your monitor and settings will probably be smaller and more of a gestalt.

Below you can see a couple in-progress photos of the relief work before I applied paint.

My New Mixed Media Relief of a Sloth

This is either finished or close to finished - I have a tendency to tweak works slightly for a number of days after the piece is "done."  

I'm naming it the closest English translation of the sloth's name: Pilgrim (Peregrina).

Pilgrim is 3P QuickCure Clay and acrylic on a 6x12" basswood panel.

Pilgrim.jpg

A Sneak Peek at My In-Progress Sloth Bas Relief

As I've mentioned before, I'm teaching an extra course this semester - Honors Seminar: Interdisciplinary Art.  The course is structured into a few different sections, with the first exploring my own interdisciplinary interests (science and art, particularly involving the fields of ecology, biology, anatomy, botany, and my collaborative work in chemistry with Dr. John Pojman developing 3P QuickCure Clay).  

For this segment, the students must use QCC and make at least one piece of artwork that explores the fields listed above that are interdisciplinary interests of mine.  Since it's such a personal-to-me assignment, I decided I'd join in on the project.  I'd considered doing a sloth for a while - I met and got to directly interact with one named Peregrina in Peru during my 2014 residency there - but I didn't want the piece to be too cutesy so I kept dismissing the subject matter until I felt ready to tackle it with a somewhat more complex take on the animal.   I decided the time is now, mostly due to finding this elongated panel (its dimensions are 6x12") which felt like a perfect match to the gangly nature of the sloth.  

I plan to paint it, so the end piece will look considerably different than this, but here's a sneak peek at the relief work before adding any paint.