3P QCC

The Advocate Article on My LASM Exhibition

in ,

Remember the Polymers in Art Through The Centuries exhibition I'm participating in (thanks to my friend Dr. John Pojman) at the Louisiana Art & Science Museum (LASM)?  It opened March 4, 2017, and was slated to run until June 4 but was extended through September 3 due to the success of the exhibition.  The Advocate, Louisiana's largest daily newspaper, recently published an article on the show, "LASM's exhibit explores the mix of art and science," including a photo of my pieces in the slideshow imagery at the top as well as text about my work.

If you're in the Baton Rouge region and haven't stopped by the exhibition yet, you've still got almost a month!

The Pursuit Blog Post for the 4th of July

in

I've been so busy that I haven't posted any articles that came out featuring me or my work, but I'm belatedly getting around to it now!  The Pursuit, the LSU College of Science blog, published its post "Science That Glows at LSU: Happy 4th of July!" written by a friend of mine, Dr. Paige Jarreau, which features my artwork and Dr. John Pojman's 3P QuickCure Clay!

Intercambiador ACART Residency Journal 13 - Exhibition Shots

in ,

Here are a handful of exhibition shots of the interactive sculptures and artist statement/exhibition text from my Quinta del Sordo exhibition in Madrid.

Intercambiador ACART Residency Journal 10 - New Artwork!

in , ,

Here's my second interactive sculpture!  It's had less time for the algae to grow on it, but so far I'm liking it.  With the snails piece, having them entirely underwater wasn't necessarily a "death sentence" for the snails as a number of species of snails are aquatic.  There are no aquatic pigeons, though, so I made this one to have its head jussssst above the top of the container.

I didn't take many in-process photos of this one primarily because a lot of pieces to this one were really delicate while uncured (the feet, the beak, the tail and wing tips) so I was mostly gently cradling it while sculpting and then went straight into curing it.  But to the right is a photo of it post-curing but pre-powdering.

Intercambiador ACART Residency Journal 3 - New Artwork!

in , ,

When I skyped with Juan about coming here, he mentioned that some of my work that interests him the most are my interactive plant pedestals.  I really enjoyed making those, but I made those in graduate school - a period in which I spent almost all my time making artwork and had access to a large woodshop and other facilities as well.  Now that I teach and often only really produce work during the summers and while on residency, it's much simpler to create more transportable (and easily exhibitable, which is a bonus) two-dimensional work.  I've started to push back at that limitation already - my pieces that I made in France are so delicate that showing anywhere other than locally is pretty difficult, and the sculptures I made earlier this summer in Portugal are even more fragile due to the found branches and lichens I used.  I decided I'd take Juan up on the challenge to create some new interactive plant pieces, and began brainstorming even before leaving for Europe.  

The clay I helped Dr. John Pojman create, 3P QuickCure Clay, is waterproof, and that's an angle I've been wanting to explore for a while.  I decided I'd like to create a sculpture that I'd then house in a glass container underwater, and as algae grew in the container, as algae tends to do when provided with water and sunlight, the sculpture would become partially or totally obscured - except I would coat the sculpture in a glow-in-the-dark powder and provide viewers with a black light to set the sculpture aglow.  Even back in Portugal, I'd briefly toyed with the idea of sculpting Balancing Act (my painting of a tower of snails), but then I thought I'd save it for this project instead.

So when I started work in the studio, I began sculpting snails.  

A sculpture is different from a painting, though, and in order to have the 3D version of the tower actually stand on its own, I couldn't have the bottom snail be upside down.  I didn't want them all to be upright, either, though... so I decided to have one snail be on its side and have that snail be on the bottom of the tower in a nod to the potential instability of all the rest.

After assembling all my individual snails into a tower, I hastily patted some glow powder onto it and cured it (the tower was moderately unstable while uncured).  I thought the amount of glow powder that actually adhered to the clay wouldn't be sufficient for my purposes, so after thinking about it for a day, I sprayed it several times with an aerosol satin varnish and each time before the varnish dried I added the glow powder to it until I felt I had a fairly solid coating.

As all this was going on, the fountain water I had collected from the Real Jardín Botánico had been sitting in the window, slowing growing more algae.  Once the sculpture's coating seemed dry, I put it into a glass vessel I had purchased from a Chinese bazaar and poured the fountain water (and some additional tap water) in.

The piece will hopefully be ever evolving as the algae grows, but it's already far enough along for me to share some photos!

Cerdeira Village Residency Journal 6 Photos 1 - My Artwork

in , , , ,

Here are a handful of photos of my overall exhibition space in the Cerdeira Village Elementos à Solta festival.  I already published individual piece images in my earlier posts, but here you can see some combined installation shots.

Cerdeira Village Residency Journal 5 - New Artwork!

in , , ,

When I was shopping at the market across from the Mosteiro dos Jerónimos, I saw a few azulejos tiles of rabbits, and I bought myself one of them - it reminded me a little of Albrecht Dürer's work.

After I finished the turtle sculpture, I decided I would do a rabbit and a bird as a partner piece to the turtle and nest mostly due to that market experience.  When I started looking at various images of rabbits in order to find one to sculpt, I decided that proportionally and structurally, a hare would be more interesting than a rabbit.  And given that I had been thinking about rabbits and hares due to this azulejos tile that reminded me of Dürer, I decided to base my sculpture off of Young Hare.

It was really quite fun sculpting a watercolor painting, as it were, and one that I highly admire.  I started off again with a styrofoam and wire base and then added QCC and began to form the body and head.  

I added the feet in three separate parts, and finally the claws and ears.  After every part was added, I detailed the fur and added some jackalope-esque branches in front of the ears.  This all took several days to come together, and obviously there were parts I had to construct myself in attempting to realize a three-dimensional animal out of a two-dimensional painting of it.

I had planned on sculpting a bird with the hare, but I liked the hare so much alone that I reconsidered.  As I was trying to decide what to do, I thought about how I would progress with the painting of the hare.  In the beginning I had thought about painting the rabbit in azulejos-inspired colors as well, but I realized when doing the turtle that the style that the shell and eggs looked quite good with it because they were fairly smooth, but when I tried to paint the turtle head and legs with various tints of blue, it got too busy and weird due to their pebbled surfaces (so I reverted them back to the clean white).  The fur of the rabbit is quite heavily textured, so I decided to paint it in a fairly realistic coloration through referencing Dürer's piece again but turning the colors just a little bit cooler in a nod to the azulejos theme and my own practice of using blue as a dominant color in my own work.

In deciding to paint it in naturalistic colors, though, I thought the two pieces wouldn't seem very related, so I figured I should do a bird - but a detachable bird, in case I ended up displaying the pieces separately as well or in case the bird didn't turn out so well.

I knew I wanted the bird to be in the azulejos color scheme, but I wasn't sure if I wanted to approximate an actual species/patterning like I did in the slider turtle shell design.  In the end, I decided the bird should be even more clearly a reference to the azulejos tiles; then there would be this strong representation in the bird and the eggs, a referential-but-also-naturalistic one in the turtle, and then an almost entirely naturalistic representation in the hare.

So here it is!  I also haven't accurately measured or titled it (though Young Hare will show up in the title somehow), but it is a mixed media ceramic sculpture including QCC, acrylic, and found branches.  Some of the photos below are of it in bright sunlight, so the cast shadows on the bird can be a little hard to parse, and all are against a brown/gray background which can make the branches difficult to differentiate too, but I will take photos of it in a white gallery space as well.

Cerdeira Village Residency Journal 3 - New Artwork!

in , , , ,

When I woke up for my first morning in Cerdeira Village, I was still a little tired and quite sneezy - I thought I would escape from my Kansas allergies but there are apparently still plenty of plants I'm allergic to in Portugal!  I soon shook it off, though, and Julia and I made breakfast and started to get to know each other.  Next I went to set up my studio space; the atelier is downstairs and next door from the residency housing.  I took over two small pottery tables and a bigger workshop table and began working on my first piece.  

When I proposed my project for this very competitive residency, I took note of how ceramics-oriented the website was and my proposal was to make some fully 3D pieces out of QCC since of late I've been doing only relief work with QCC.  For my first sculpture, I decided I would create a slider turtle with branches growing atop its back supporting a nest.  I picked a turtle for a few reasons - 1) I'd sculpted two turtles a few years ago out of QCC but never felt I fully resolved their form and wanted to improve upon that work; 2) there is a multicultural myth that the world is supported on the back of a great turtle; 3) I hadn't seen very many animals in Portugal yet given that I'd only been there a couple days, but I had seen at least two different species of slider (red-eared and yellow-bellied) at the Estufa Fria in Lisbon.

I started the sculpture by carving a rough approximation of the shell out of styrofoam.  This was mostly to save on clay usage - I can only carry one bucket of it at a time due to the size and weight it occupies in my luggage, so I want to be smart in how I use it up - but also helps with the weight of the piece, which is important because I will have to ship my artworks back to the US and weight sharply increases the shipping costs.

Then I applied QCC in a relatively thin layer around the styrofoam and began to shape and detail it (hacking out bits of styrofoam as well if I needed to).  The shell took a lot longer than I thought it would to really shape properly; I did not finish it the first day.

I continued work the second and third days on the turtle.  After finally detailing the shell, I moved on to the head and feet.  I did them all separately so I could be very considered in my markmaking, and finally I assembled all the pieces and added a tail and other final detailing by the end of the third day.  I had planned to make the branches and nest out of the QCC as well, but I became enchanted by the local lichens that grow on the trees here and ended up pushing real branches into the turtle's back before curing the whole piece.

 Afterwards, I did add a nest and two eggs made out of QCC into the branches.

On the fourth and fifth days, I painted the turtle, nest, and eggs white.  I had got it into my head to reference the azulejos tiles so common to Portugal in the painting of the sculpture; the starting point was turning the natural light tan of the clay the bright white of the glazed tiles.  I had only brought one type of paint with me - my Golden OPEN Acrylics - which are great for normal painting needs but are really poor as a base coat due to their long dry time.  Here in Cerdeira Village, they seem to dry even slower - in fact, barely at all - and I ended up just going ahead and painting the turtle shell with an azulejos-inspired, painted-turtle-shell-based design on the sixth day here despite the shell still being faintly wet.  I also painted the eggs with a small decorative motif seen in the corners of some azulejos tiles.  The turtle and eggs took almost a week to dry, but aided by my eventual realization that I needed to put them outside in the sun to assist, they were handle-able by the time I needed to install them in their exhibition space the morning of June 2.

So here's the piece!  I haven't measured it yet, nor titled it (I've got some ideas mulling), but that will come.  It is a mixed media ceramic sculpture including 3P QuickCure Clay, acrylic, and found branches and lichens.

Newspaper Article in The Daily Reveille

in ,

Here's some more press on the Polymers in Art Through the Centuries exhibition at the Louisiana Art & Science Museum (LASM) and my collaboration with Dr. John Pojman from Louisiana State University (LSU)!  The Daily Reveille even uses a photo of my artwork in the exhibition as the article image!  The show is up through September 3rd, if you will be in the region and want to stop by.

A Photo Gallery from My LASM Exhibition Trip

in , , , ,

I have a few more photos to share from my LASM exhibition and associated demos/events!  This was a fantastically fun trip, all thanks to the amazing Dr. John Pojman.

The Baton Rouge Ebb & Flow Festival

in

Dr. John Pojman and I had a demo station set up at the Ebb & Flow Festival today in Baton Rouge - a student of his joined us and we formed part of the Louisiana Art & Science Museum brigade and demonstrated the non-Newtonian fluid behavior of cornstarch plus water as well as QuickCure Clay.  We also got a chance to take in the rest of the festival, and I happened to see two friends of mine had an art booth selling their own paintings!  It was a beautiful day (I managed to get sunburnt!) and I topped it off by getting a snowcone from one of the vendors.  The festival will continue tomorrow, but our booth was a Saturday-only event.

Radio Interview with The Jim Engster Show

in ,

Dr. John Pojman and I will be guests on The Jim Engster Show today at 4:35pm CDT talking about polymers and art!  You can livestream it or listen to it later as a podcast.  This show is broadcast on six different radio stations across Louisiana.

Video Clip of LASM QCC Demo

in , , ,

I have a full schedule of demonstrations, lectures, and interviews for the next couple of days associated with the Polymers in Art Through the Centuries exhibition going on at the Louisiana Art & Science Museum (LASM) - the first took place earlier this evening!  An LASM public relations staff member posted livestream video to Facebook throughout the night - here's a snippet:

Polymers in Art Through the Centuries Exhibition at the Louisiana Art & Science Museum

in , ,

My collaboration with Dr. John Pojman and his company 3P (Pojman Polymer Products) has led to my exhibiting in this amazing show!  Polymers in Art Through the Centuries is a fantastically interesting exhibition held at the Louisiana Art & Science Museum (LASM) in Baton Rouge, Louisiana.

Polymers in Art Through the Centuries opened today!  Its show dates are March 4 - June 4, 2017, and it is held in the Soupçon Gallery in the LASM.  For information about the LASM hours of operation and cost of admission (though please note that there are a number of free admission days), please check this link out.

I will be demonstrating 3P QuickCure Clay and discussing my work with the sculptural and relief medium along with Dr. John Pojman onsite at the LASM during their Art After Hours: The Substance of Art event on Thursday, March 30, 2017 from 5:30 - 7:30pm.  Other artists including Monica Zeringue, violist and composer Christian Frederickson, and local dance company Of Moving Colors will be contributing to the evening as well, and A Work in Process: Paintings by Gustave Blache III and It’s Academic: A Hands-On Art Experience will also be open for viewing.  Complimentary wine and appetizers are included with admission, which is $7.50 for adults, $5.50 for college students with ID, and free for members.

My New Mixed Media Relief of a Sloth

in

This is either finished or close to finished - I have a tendency to tweak works slightly for a number of days after the piece is "done."  

I'm naming it the closest English translation of the sloth's name: Pilgrim (Peregrina).

Pilgrim is 3P QuickCure Clay and acrylic on a 6x12" basswood panel.

Pilgrim.jpg

A Sneak Peek at My In-Progress Sloth Bas Relief

in ,

As I've mentioned before, I'm teaching an extra course this semester - Honors Seminar: Interdisciplinary Art.  The course is structured into a few different sections, with the first exploring my own interdisciplinary interests (science and art, particularly involving the fields of ecology, biology, anatomy, botany, and my collaborative work in chemistry with Dr. John Pojman developing 3P QuickCure Clay).  

For this segment, the students must use QCC and make at least one piece of artwork that explores the fields listed above that are interdisciplinary interests of mine.  Since it's such a personal-to-me assignment, I decided I'd join in on the project.  I'd considered doing a sloth for a while - I met and got to directly interact with one named Peregrina in Peru during my 2014 residency there - but I didn't want the piece to be too cutesy so I kept dismissing the subject matter until I felt ready to tackle it with a somewhat more complex take on the animal.   I decided the time is now, mostly due to finding this elongated panel (its dimensions are 6x12") which felt like a perfect match to the gangly nature of the sloth.  

I plan to paint it, so the end piece will look considerably different than this, but here's a sneak peek at the relief work before adding any paint.

Exhibition Photos from La Maison Verte Residency at the Jardin Botanique de Marnay-sur-Seine

in ,

Here are a few images from the La Mason Verte June 2016 Artists in Residence Exhibition I had in the Jardin Botanique de Marnay-sur-Seine.  My exhibition was entitled Garden Lore.  The door, obviously, is permanently installed, and was about 20 feet away from the display area I used for the rest of my pieces.  Note how the garden staff tidied up the door's surrounding area for the exhibition and added a permanent sign with my details on it!  Two of the photos below (the ones with a bit of an apricot tint) were taken by photographer Abril M. Barruecos.